CrystalView DP Active Optical Cable

Mehr Ansichten

CrystalView DP Active Optical Cable
SKU: CLK-AHCD14-AMAMxxx

Fiber video extender cable • DisplayPort 1.4 • 50m


The CrystalView DP Active Optical Cable extends your DisplayPort 1.4 video display at 8K60 with 16-bit HDR up to 330 feet (100 m) away from your computer. The cable embeds all of the optics and electronics into the cable head to provide a sleek and streamlined installation. No external power supply is needed because all of the power is supplied by the DisplayPort interface. The cable is available in fixed lengths:



  • 32.8' (10m)

  • 65.6' (20m)

  • 98.4' (30m)

  • 164.0' (50m)


There are so many places where this cable can be used such as in digital signage, presentation venues, hotel and restaurant, medical facilities, retail locations, industrial settings, military sites, and many other environments.


It has a low smoke zero-halogen jacket which permits it to be used in plenums, walls, and ceilings. Running in conduit is not required. It is installed and connects just like a copper cable, except it must be installed in the correct direction. It's 4mm jacket size is small and has a low bend radius of less than an inch (20mm). It is rugged with a crush resistance of 400N short term and 200N long term.


The cable is a hybrid style with both glass fiber and copper. The high speed video signals with embedded audio are transmitted in fiber with support for DSC (display stream compression). All audio formats are supported including up to 32 audio streams at 1536Khz sampling rate. The DDC, AUX, and hot-plug detect signals are passed through untouched in copper and therefore no setup or any special requirements are needed. The cable is HDCP compliant to all versions.


For maximum benefit, pair it with Rose USB 3.1 optical extender cables to make a complete high-speed KVM extension.

Technisches Datenblatt als PDF herunterladen ›
Beschreibung

Produktbeschreibung

  • Cable with integrated optics to extend DisplayPort 1.4 up to 165 feet (50m)
  • Direct point-to-point active optical cable plugs directly into your equipment
  • Available in lengths of 32.8', 65.6', 98.4', and 164.0' (10m, 20m, 30m, and 50m)
  • Supports resolution of 7680x4320 @60Hz
  • Supports 16-bit HDR at 8K60 4:2:2
  • Bandwidth of 32.4 GBps
  • Plug-and-play no configuration required, plugs in just like a copper cable
  • Draws its power from the DisplayPort interface, no external power needed
  • Low smoke zero halogen jacket can be run through plenum or floor-to-floor
  • Optimum transmission uses glass fiber for high speed signals(video) and copper for low speed signals (AUX, DDC, HPD)
  • Use two cables in parallel to support Dell Ultra Sharp UP3218K 8K monitor
  • Supports multi-stream transport
  • Extremely low EMI or RFI radiation
  • Very low bend radius of less than an inch (20mm)

SPECIFICATIONS

Dimensions Jacket diameter: .16" (4.0mm)Cable head W x D x H21mm x 47mm x 9mm + connector
Net weight 10m 250g20m 460g30m 670g50m 1090g
Power Bus powered from host device375mW @ 3.3V
Resolution Up to 7680x4320 @ 60Hz (DP1.4)
Bandwidth 32.4 Gbps
HDR Any format per DP1.4 spec
Audio Any format per DP1.4 spec
Jacket material LSZH (low smoke zero halogen)
Tensile strength Long term 100NShort term 200N
Crush resistance Long term 200NShort term 400N
Bend radius Dynamic 20mmStatic 10mm
Cable conductors 4 glass fibers5 copper conductors
Distance 32.8' (10m)65.6' (20m)98.4' (30m)164.0 '(50m)
Connectors DP male with lock(source)DP male with lock (display)
Environment Operating temperature: 32°F–122°F (0°C–50°C)Storage temperature: -4°F–122°F (-20°C–50°C)Relative humidity: 15%–85%, non-condensing
Zusatzinformation

Zusatzinformation

Artikelnummer CLK-AHCD14-AMAMxxx
Produkt Verfügbarkeit Nein
Benutzer Nein
Ports Nein
HE Nein
DVI Nein
VGA Nein
Breite Nein
Länge Nein
Multiplattformfähig Nein
IP-Zugriff Nein
Verkabelung CatX/Koax Nein
Anschlussart PS2/USB Nein
Audio Nein
Access Nein
Verkabelung CatX/LWL Nein
Multi Video Nein